SANDBLASTING NOZZLES - ASSORTED - 3 PACK

Sandblasting Nozzles Set of 3; 1 each of: 

• Fine  - spot coverage, surface etch only 
  
• Medium - medium coverage, surface etch; deep etch when used with adapter 
  
• Wide - wide coverage, surface etch; deep etch when used with adapter 
  

Made for Aero-Etch All Purpose Sandblaster.

To change the nozzle:  Make sure the stylus toggle is in the unlocked position. Use pliers to twist and remove the nozzle from the end of the stylus. Slide the nozzle and hose about two inches beyond the stylus tip. Detach the used nozzle from the hose end. If necessary, trim the hose end with a straight cut.  Replace with a new nozzle and slide the hose and nozzle back into the stylus. Press the nozzle firmly back into the stylus tip.